COMPONENTS
The following components are provided for flood barriers at 600mm high and under 4,000mm in width
Wall Post
Material - 6063-T5 Construction Aluminium
Height - 675mm
Depth - 50mm
Width - 90mm
Dam Beam
Material - 6063-T5 Construction Aluminium
Height - 220mm
Depth - 36mm
Weight - 3.33kg/m
Pressure System Slide in Plate
This robust securing plate slides into the top of the wall post, helping support the durable and water-tight downwards pressure seal on the flood barrier.
Material - 304 Stainless Steel
Dimensions - 72 x 47 x 5mm
Pressure System Bolt
These heavy-duty screws are used for securing the flood barrier components. Easy to use and robust, they ensure maximum durability for the flood barrier’s pressure sealing mechanism.
Material - A2-70 Stainless Steel
Size - M14
Allen Key
This handy tool is used for tightening the securing screws on our flood barriers to ensure maximum durability for the flood barrier’s pressure sealing mechanism.
Material - 304 Stainless Steel
Size - 12
Rubber Seal (Bottom)
This large rubber seal is used along the bottom of the dam beam. Using a pressure sealing mechanism, it provides durable and heavy duty water-proofing in conjunction with the flood barrier.
Material - EDPM
Dimensions - 18 x 35mm
Rubber Seal (Middle)
This small rubber seal is placed for middle dam beam. Using a pressure sealing mechanism, it provides durable and heavy duty water-proofing within the dam beam.
Material - EDPM
Dimensions - 6 x 10mm
Side Cover
An integral part of the inner mechanisms, this piece functions both to protect the user from the sharp edges of the custom-cut dam beam and to assist in securing the large rubber seal across the bottom of the flood barrier dam beam.
MaterialPP
Dimensions216 x 35 x 20mm
Bolt Stopper
These fixtures are part of the durable downwards pressure seal on the flood barrier. Secured on the sides of the top dam beam, it provides a robust niche for the securing screws to slot into.
Material304 Stainless Steel
Dimensions45 x 24 x 27mm
Middle Support Post
Material - 6063-T5 Construction Aluminium
Height - 675mm
Dimensions - 100 x 92mm
Ground Pin
This durable component provides a permanent and heavy duty fixture for the mid-point support post. It allows for easy removal or installation of the support post should the construction of a flood barrier greater than 4000mm be required.
Material - Aluminium
Dimensions - 115 x 23mm
Middle Post Ground Base
Material - Steel
Dimensions - 168 x 100mm
Ground Pin
This durable component provides a permanent and heavy duty fixture for the mid-point support post. It allows for easy removal or installation of the support post should the construction of a flood barrier greater than 4000mm be required.
Material - Aluminium
Dimensions - 115 x 23mm
L-Corner Post
Ground Base MaterialSteel
Ground Base Dimensions200 x 200mm